Author: mystajones
-
+
+
+
+
+
+
Supplying communications, both Satellite and Wireless to a remote Australian Power Station and the surrounding local community.
-
+
+
+
+
+
+
Basic DHCP Service on a 3560-CX for some remote clients on the end of a wireless link. SW1#conf t Enter configuration commands, one per line. End with CNTL/Z. SW1(config)#service dhcp SW1(config)#ip dhcp pool SITE-POOL SW1(dhcp-config)#network 10.1.1.1 255.255.255.0 SW1(dhcp-config)#default-router 10.1.1.1 SW1(dhcp-config)#dns-server 10.2.3.4 10.2.3.6 SW1(dhcp-config)#domain-name ads.somedomain.com.au SW1(dhcp-config)#lease 8 SW1(config)#ip dhcp excluded-address 10.1.1.1…
-
A good guide to some of the basics with wireless bridges.
-
+
+
+
+
+
+
Setting up Outlook 2011 for Mac Setting up email on my iPhone/iPad
-
+
+
+
+
+
+
Doesn’t work – Cisco 😞
-
+
+
+
+
+
+
I was recently asked to design a point-2-point wireless solution which fast became a point-to-multipoint. Regardless of the design the Access Points used were AIR-AP1532E-UXK9 with a vision of utilising the 5Ghz back-haul and a 14dBi directional antenna to cover line-of-sight. These UX Access Points address the worldwide regulatory compliance by dynamically setting…
-
+
+
+
+
+
+
The tiles are in, my fist floating shelf and a dash of paint – check !
-
+
+
+
+
+
+
It’s been a couple of weeks now and the kitchen is slowly coming together 👍🏼
-
asa01# aaa-server LDAPSERVERS protocol ldap asa01 (config-aaa-server-group)# aaa-server LDAPSERVERS ([interfacename]) host [ipaddress] asa01 (config-aaa-server-group)# ldap-base-dn DC=somedomain,DC=com,DC=au asa01 (config-aaa-server-group)# ldap-scope subtree asa01 (config-aaa-server-group)# ldap-naming-attribute sAMAccountName asa01 (config-aaa-server-group)# ldap-login-password ***** asa01 (config-aaa-server-group)# ldap-login-dn CN=VPN_Account,OU=Users,DC=somedomain,DC=com,DC=au asa01 (config-aaa-server-group)# server-type auto-detect To verify your configuration: asa01 (config-aaa-server-group)# test aaa-server authentication LDAPSERVERS host [IPAddress] username [someone] password…
-
+
+
+
+
+
+
Cisco AnyConnect Secure Mobility Client Administrator Guide, Release 4.0 Configure AnyConnect Secure Mobility Client with Split Tunneling on an ASA – Cisco Troubleshooting using DART